![]() |
![]() |
Gather the appropriate tools: Modified Transparent M, a cartridge gun, a spatula, masking tape, cloth, a nozzle cutter. |
![]() |
![]() |
Place the masking tape appropriately at the construction area. It is recommended to use a special primer for better adhesion strength. |
![]() |
![]() |
Remove the nozzle and then use the nozzle or other sharp objects to pierce the seal. |
![]() |
![]() |
Cut the nozzle appropriately sized to match construction area. Load up the cartridge gun. |
![]() |
![]() |
To prevent air from leaking to the construction area, press hard on the nozzle when applying the sealant. |
![]() |
![]() |
Use a spatula to even out the surface. |
![]() |
![]() |
Peel off the masking tape before the sealant cures. |
![]() |
Complete |
After the sealant cures, the installation is complete. Do not touch anything beforehand. |
![]() |